MICRO DRY FOG CEILING MOUNT – (Multi-Zone System) allows for precise control and low Noise and is Ideal for Noise sensitive areas. With no need for calibration, it is fully automated giving you the option to automatically turn it on at any set time.

MICRO DRY FOG MOBILE SYSTEM

Mobile unit is a complete plug and play mobile humidification and distribution system that’s perfect for on-the-go applications.

Using our fully automated energy efficient system specially designed for simple operation and low maintenance, you’ll be able to achieve the following without increasing utility bills or compromising safety:

• Non-Wetting precise disinfection elimination of viruses, mold, bacteria & dust.
• No drains, no pumps or fans required.
• Mobile unit works indoor and outdoors.

No matter your preference, both Micro Dry Fog Systems give you the same great proven results and benefits.

• Specially designed for simple operation and low maintenance, without increasing utility bills or compromising safety.
• Non-Wetting Precise Disinfection using our fully automated energy efficient systems
• Elimination of Viruses, Germs, Mold, Bacteria & Dust.
• No drains, pumps, fans, hazmat suits, or gas masks are required

The Micro Fog Dry System has been used for over 20 years, to combat biosecurity issues for human applications, and is Ideal for

• HOSPITALS
• OFFICES
• WAREHOUSES
• SCHOOLS
• AVIATION
• COMMERCIAL PROPERTIES
• RESIDENTIAL PROPERTIES

Its speed coverage and reliability makes the NANOBLASTER PRO – Micro Dry Fog System Combo
the best choice for your cleaning, disinfecting and sterilization needs.

Clinically Proven, Lab Tested and Certified NANOBLASTER PRO KILLS 99.9% of all Germs, Bacteria, Pathogens, Mold and Viruses, including the Human Coronavirus. and other harmful pathogens, without adding toxic chemicals to our environment, or leaving any residue behind but, offering unparalleled benefits.

Properly cleaning and disinfecting your environment are some of the most effective preventative measures for eliminating viruses, germs, bacteria and mold.  Disinfection equipment provide many critical features required to clean and disinfect the environment effectively.

Fogging provides a powerful disinfecting solution, providing uniform fast distribution while penetrating the smallest hard to reach surfaces, thus providing 100% application success.  Certified to use with any chemical.

MICRO DRY FOG droplets are 98% below 10um in size with an average size of around 3.9um; whereas, Electrostatic sprayers range from 40-110um in size.

This allows Micro Dry Fog to effectively collide with airborne bacteria and viruses, deactivating them in the air, while other sprayers droplets are too large for airborne capture.

Dry Fog through manipulation of the solution pressure can create larger droplets by using the high “turn-down ratio” of the nozzle, which allows the dry fog system to go from 0.1um droplets all the way to 500um droplets with the same nozzle and only small manipulation of the solution regulator.

In comparison a single gallon of solution with a 3.9um droplet will fill an area of 42,000 square feet, while an other sprayers even at best with 40um will fill only 5,177 square feet or 8 times less surface area coverage.

Due to the smaller droplets, they also will not drop out of the air as quickly, providing much better dwell time with the fog, allowing it to contact more areas and for longer periods of time.

PENETRATION
Unique engineered droplets penetrate hard to reach surfaces providing 100% application success of the disinfectant.  Both the targeted area and the HVAC system are cleaned in one application.

LIGHT SPEED
Provides light-speed uniform coverage.  The 100% evaporating achieved at velocity provides a vehicle in transporting the chemical equality to the entire targeted area.

NO DAMAGE
System provides full coverage without harming or damaging the target surface.  The proprietary non-wetting fog layer technology allows for precise control over the surface contact of the chemical with the surface.

MICRO DRY FOG droplets are 98% below 10um in size with an average size of around 3.9um; whereas, Electrostatic sprayers range from 40-110um in size.

This allows Micro Dry Fog to effectively collide with airborne bacteria and viruses, deactivating them in the air, while other sprayers droplets are too large for airborne capture.

Dry Fog through manipulation of the solution pressure can create larger droplets by using the high “turn-down ratio” of the nozzle, which allows the dry fog system to go from 0.1um droplets all the way to 500um droplets with the same nozzle and only small manipulation of the solution regulator.

In comparison a single gallon of solution with a 3.9um droplet will fill an area of 42,000 square feet, while an other sprayers even at best with 40um will fill only 5,177 square feet or 8 times less surface area coverage.

Due to the smaller droplets, they also will not drop out of the air as quickly, providing much better dwell time with the fog, allowing it to contact more areas and for longer periods of time.

PENETRATION
Unique engineered droplets penetrate hard to reach surfaces providing 100% application success of the disinfectant.  Both the targeted area and the HVAC system are cleaned in one application.

LIGHT SPEED
Provides light-speed uniform coverage.  The 100% evaporating achieved at velocity provides a vehicle in transporting the chemical equality to the entire targeted area.

NO DAMAGE
System provides full coverage without harming or damaging the target surface.  The proprietary non-wetting fog layer technology allows for precise control over the surface contact of the chemical with the surface.

For starters, our droplet size is smaller than our competitions, but that’s not the only reason. Here are Eleven reasons why you should consider the NANOBLASTER PRO – Micro Dry Fog System Combo.

1.  4.2 Microns Droplets
The secret of the NANOBLASTER PRO – Micro Dry Fog System Combo lies in the small droplet size of the water and the engineered spacing between the air and water. The Micro Dry Fog System has succeeded in manipulating the droplet size to be the smallest in the industry.

Why is the droplet size important? Water evaporates only from the surface of the droplet. If the surface area of the droplet in relation to the volume of water is decreased, then the evaporation efficiency is increased. The smaller the droplet size, the longer it can stay air borne. Therefore, the smaller the droplet size the fastest and efficient evaporation is achieved. The 4.2 micron droplets created by the Micro Dry Fog System evaporates completely into the air before reaching any surface.  The Micro Dry Fog System has achieved 100% evaporation rate, achieving 100% water efficiency. The Micro Dry Fog System IS A FOGGER THAT DOES NOT MOISTEN THE EXPOSED SURFACES

2. Energy Efficient Natural Process The Micro Dry Fog System uses 50-90% less energy than other technologies. The Micro Dry Fog System technology utilizes a natural decorrelation process.  Correlation refers to the cohesion and adhesion properties in water.Cohesion: Water is attracted to other water. Adhesion: Water attracted to other materials.These effects are caused by the negative charge of the Oxygen molecule and the positive charge of the Hydrogen molecule attracting. The Micro Dry Fog System De-Correlation Technology reverses the correlation effect through a non-chemical mechanical process The technology reverses the cohesion and maximizes adhesion. This process is the most energy efficient way of generating a water droplet.

3. Jumbo Non-clogging Orifice The Micro Dry Fog System de-correlation process allows the use of a large orifice both for input and output.A large orifice size means the nozzle can not clog easily. Therefore, ensuring low maintenance.Additionally – all of our nozzles are made from a high grade 316 stainless steel, allowing any chemical to be used with the system and avoiding any rusting and corrosion.

4. Double Cooling Effect Optional feature, The Micro Dry Fog System nozzles can generate a strong vacuum, which cools both the air and the water. Regardless of the input temperature, the output is always 4°C (40°F).  Cold Fog.  Additionally, the rapid evaporative cooling caused by the fast evaporation takes the heat from the air. This is another factor that helps to reduce the energy cost of cooling. For example, in a greenhouses environment The Micro Dry Fog System can reduce consistently 110-degree F outside to 80-degrees F inside temperature.

5. Low Pressure Safe Operation The Micro Dry Fog System utilizes only 100 psi of compressed air. This low pressure operation allows the use of flexible plastic piping making the installation fast and easy. More importantly, the low pressure and non heating mechanism eliminate any human safety factors, and does not require any regulations. The Micro Dry Fog System utilizes less than 2 AMPs of 24 V DC at their control unit only. The rest of the system is completely pneumatic. This eliminates any human hazards, and makes the installation easier.

6. Intelligent Precise Humidity Control The Micro Dry Fog System is equipped with a CPLC controller which utilizes our propriety intelligent algorithms to identify the most efficient way to generate the required humidity for any given environment.

7. Eliminates Dust, Mold, Bacteria & Virus  The Micro Dry Fog System technology injects Oxygen into every droplet dispensed.  The Micro Dry Fog System De-Correlation Technology reverses the correlation effect through a non-chemical mechanical process. The technology reverses the cohesion and maximizes adhesion. Dust and air borne diseases, bacteria, viruses particles and spores are attracted to the Smart Fog droplets by adhesion and are oxidized. In order to achieve 100% dust suppression, droplets smaller than 5 microns must be in the air. Droplets of 5 microns or larger naturally retract air particles, and doesn’t suppress small dust and other air borne particles. The Micro Dry Fog System technology provides even 4.2 micron droplets which are ideal for 100% dust suppression. The Micro Dry Fog System aids in the reduction of dust and air borne bacteria/viruses from the air.

8. 4 Functions – 1 System

1. PRECISE HUMIDITY CONTROL
2. DISINFECTION/SANITATION
3. COOLING
4. DUST SUPPRESSION & STATIC ELIMINATION

9.  Plug & Play Installation  The Micro Dry Fog Mobile System is designed for fast and low cost installation. The system does not require the use of any adhesives, and comes with a push-in connectors which can be re-used.  The system is designed to meet the highest industry standards, building codes and electrical requirements. All standard system piping are plastic flexible piping which are extremely durable and easy to install. The Micro Dry Fog System can, placed adjacent to air handling units, suspended from the ceiling or inserted into ducts.

10. Extended Warranty The Micro Dry Fog System comes with comprehensive one year warranty.  We also provide a comprehensive economical extended warranty plan, covering all equipment.

11. NO Moving Parts